LXE vx3plus 参照ガイド
Control Panel Options
101
E-EQ-VX3PLUSRG-A
VX3Plus Reference Guide
PC Connection
Access:
Start | Settings | Control Panel | PC Connection
Control the connection between the VX3Plus and a nearby desktop/laptop computer.
Factory Default Settings
Allow Connection
Enabled
Connect Using
‘USB Client’
Tap the Change button to adjust the settings and tap the OK button to save the changes. The
changes take effect immediately.
changes take effect immediately.
Unchecking the “Allow connection with …..” disables ActiveSync.
Change ….
Tapping Change lists configured ActiveSync connections. In addition, there is a checkbox for
Automatic Connect. This option applies to USB connection only. If this checkbox is checked,
when the USB cable is connected, the VX3Plus will automatically try to start ActiveSync over the
USB port. Note that this interferes with processes on the configured port at the same time.
Automatic Connect. This option applies to USB connection only. If this checkbox is checked,
when the USB cable is connected, the VX3Plus will automatically try to start ActiveSync over the
USB port. Note that this interferes with processes on the configured port at the same time.
Figure 3-27 Communication / PC Connection Tab
Please refer to the “Backup VX3Plus Files” section later in this chapter for parameter setting
recommendations.
recommendations.