LXE vx3plus 参照ガイド
Reflash the VX3Plus
119
E-EQ-VX3PLUSRG-A
VX3Plus Reference Guide
Reflash the VX3Plus
Note:
When reflashing, LXE recommends using a Compact Flash (CF) card that is greater
than 64MB. Files to be loaded on the CF card are: NK.BIN, EBOOT.NB0, XSCALE.BIT.
than 64MB. Files to be loaded on the CF card are: NK.BIN, EBOOT.NB0, XSCALE.BIT.
Requirements:
• A screwdriver (not supplied by LXE)
• PCMCIA to CF card adapter
• PCMCIA to CF card adapter
Preparation
• LXE recommends that installation of the CF card be performed on a clean, well-lit
surface.
• Loosen the captive screws securing the user access panel cover. The cover is
tethered to the VX3Plus.
Caution
!
Make sure the VX3Plus has an uninterrupted power connection before beginning
the reflash procedure. Loss of power during the reflash process can result in
corrupted files.
the reflash procedure. Loss of power during the reflash process can result in
corrupted files.
How To: Reflash using Keypress Method
1. Place the PCMCIA adapter containing the CF card with new image files on it in the PCMCIA
slot.
2. Double-click My Computer, then Storage Card folder.
3. Select NK.BIN, EBOOT.NB0, XSCALE.BIT. Select Edit | Copy.
4. Tap Back Arrow. Double-click \System folder.
5. Select Edit | Paste. When asked “Overwrite ?”, tap Yes to All.
6. When the copy process finishes, remove the PCMCIA adapter containing the CF card.
7. Select Start | Run and type Coldboot. Tap OK.
8. Before the splash screen appears, press and hold down the <A> key. Continue to hold it down
until the displays shows “Writing to boot flash”
Note: If you do not press and hold the <A> key quickly enough, the display shows
“Loading OS Image”. Reboot and press and hold the <A> key again.
9. The VX3Plus automatically reboots after flashing the bootloader. “Loading OS Image” is
displayed on the screen and when the new OS finishes loading, all software upgrades are
complete
complete
10. Replace the endcap, being careful not to pinch any leads or cables.