LXE vx3plus 参照ガイド
Bluetooth
21
E-EQ-VX3PLUSRG-A
VX3Plus Reference Guide
Bluetooth
Access:
Start | Settings | Control Panel | Bluetooth or Bluetooth icon in
taskbar or Bluetooth icon on desktop
taskbar or Bluetooth icon on desktop
or
Tap the Bluetooth icon in the taskbar to open the Bluetooth LXEZ Pairing
application.
application.
The VX3Plus default Bluetooth setting is Enabled.
The LXE VX3Plus Bluetooth
®
module is designed to Discover and pair with nearby LXE
Bluetooth devices. Only LXE printers or scanners are recognized and displayed in the Bluetooth
panel. All other Bluetooth devices are ignored.
panel. All other Bluetooth devices are ignored.
Prerequisite
The Bluetooth devices (printers and/or scanners) have been setup to allow them
to be “Discovered” and “Connected/Paired”. The SysAdmin is familiar with the
pairing function of the Bluetooth devices.
to be “Discovered” and “Connected/Paired”. The SysAdmin is familiar with the
pairing function of the Bluetooth devices.
Figure 1-9 Bluetooth Devices Display – Before Discovering Devices
Initial Use
1. Select Start | Settings | Control Panel | Bluetooth or tap the Bluetooth icon in the taskbar or
on the desktop.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth
VX3Plus default name is determined by the LXE factory installed software version. LXE
strongly urges assigning every VX3Plus a unique name (up to 32 characters) before
Bluetooth Discovery is initiated.
strongly urges assigning every VX3Plus a unique name (up to 32 characters) before
Bluetooth Discovery is initiated.
4. Check or uncheck the VX3Plus Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
See Also: Chapter 3 – System Configuration, section titled Bluetooth.