LXE vx3plus 参照ガイド
28
Bluetooth
VX3Plus Reference Guide
E-EQ-VX3PLUSRG-A
Bluetooth Beep and LED Indications
Beep Type from Bluetooth Device
Behavior
Acknowledge label
1 beep
Label rejected
2 beeps at low frequency
Transmission error
Beep will sound high-low-high-low
Link successful
Beep will sound low-medium-high
Link unsuccessful
Beep will sound high-low-high-low
LED on Bluetooth Device
Behavior
Yellow LED blinks at 2 Hz
Linking in progress
Off
Disconnected or unlinked
Yellow LED blinks at 50 Hz
Bluetooth transmission in progress
Yellow LED blinks at the same rate as
the paging beep (1 Hz)
the paging beep (1 Hz)
Paging
Green LED blinks once a second
Disabled indication
Upon startup, if the scanner sounds a long tone, this means the scanner has not passed its
automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is repeated.
Contact LXE Support for assistance.
automatic Selftest and has entered isolation mode. If the scanner is reset, the sequence is repeated.
Contact LXE Support for assistance.