Canon lbp5970 ユーザーガイド
32
Step
4
Insert the toner cartridge so that the orientation of the character on the toner
cartridge and that on the toner cover match.
6
Tilt the lock release lever (A) to the position of "
" to lock
the toner cartridge.
Align the triangular mark on the lock release lever with that on the toner cartridge.
7
After installing all the toner cartridges, close the toner
cover.
IMPORTANT
•
If you cannot close the toner cover, check if the toner cartridges are
installed properly. If you try to close the toner cover forcefully, this may
result in damage to the printer or toner cartridges.
•
Do not leave the toner cover open for a long time after installing the toner
cartridge.
•
When removing a toner cartridge, tilt the lock release lever of the toner
cartridge to the position of "
" to release the lock before you remove the
toner cartridge.
NOTE
If <CHG."color" TNR> ("color" indicates K, Y, M, or C) appears after
installing the toner cartridges, remove the toner cartridge of the indicated
color, hold the toner cartridge so that the tab is at the bottom, shake the
cartridge up and down forcefully again to evenly distribute the toner inside
the cartridge, and then install the toner cartridge ("K", "Y", "M", and "C"
indicate Black, Yellow, Magenta, and Cyan respectively).
Match the orientation
of the characters.
of the characters.
Top View
(A)
Align at this point
Top View