Aquatic aq-dvd-3 オーナーマニュアル
3. Press Vol Up/Down again to select the first digit of the channel you want to tune to (0, 1, or 2).
4. Press the AUDIO button to enter the first number and move to the second position.
5. Press Vol up/down again to select the second digit of the channel you want to tune to (0 - 9).
6. Press the AUDIO button to enter the second number and move to the third position.
Note:
Use the UP TUNING (>>|) or DOWN TUNING (|<<) button to move between the first and
third positions.
7. Turn the Vol up/down again to select the third digit of the channel you want to tune to (0 - 9).
8. Press the AUDIO button to enter the third number and access the channel.
Note:
If the channel is unauthorized or invalid, “CH Unavail” appears on the LCD and return to the
input interface after 2 seconds.
Method 2-Category Mode
To select stations in a specific category, perform the following steps.
1. Press and hold the Band button until ”Direct-T” appears.
2. Press Band button again to “CATEGORY” searching mode.
3. User can either press Vol up or short press “AUDIO” button to confirm enter into the category /
channel navigate searching mode.
4. Press Vol up/down to navigate thru the category, the category name will display on the LCD.
5. Once the desired category is displayed on the LCD. Short Press “AUDIO” button to confirm enter
into the chosen category.
The first channel name under the chosen category will be displayed on the LCD. User can either
press Vol Up/Down or Track Up/Down button to navigate thru the channels under the chosen
category. Once found the desired channel display on the LCD, Short press “AUDIO” to confirm
play the selected channel.
Tips:
Under the Channel navigate, Short press “AS/PS” button to quick return back to the category
which is under those channels.
Diagnostic Mode
Enter into Diagnostic Mode
1) Long press Ix-Bass button under XM mode, then “Diagnostic” will be displayed on the LCD. If no
button is pressed within 10 secs, unit will auto exit Diagnostic mode.
2) Press AUDIO button to confirm entrance into Diagnostic mode.
3) Press Volume up/dn to select STATE message from STATE 1 to STATE 9.
Exit Diagnostic Mode
1) Press and hold Ix-Bass button or
2) Press AS/PS button
Page 15 of 32