Aquatic aq-dvd-3 オーナーマニュアル
2.2 System MENU
Function List
When you press the MENU button for < 3 seconds, the following list of items are inside the MENU:
Contrast – Display
Low Batt – 10.5V Low Battery Alert On/off
Dimmer – High/Low
Distant / Local – Tuner Seek mode
Area – Tuner Freq. Step spacing
Rear Speaker – On/Off
INTERAMP – On/Off
Vol PGM - Programmable turn on volume
Beep Tone – On/Off
Steps to access Menu items:
1) To access the MENU press the Menu button < 3 seconds.
2) “MENU” will be displayed for 2 seconds, and then “CONTRAST” will appear on the display.
3) To navigate through the MENU use the >>| or |<< buttons to navigate thru the menu items, or
Press the MENU BUTTON repeatedly to view the menu items.
4) To adjust the selected menu item, press the VOLUME +/-
5) After the selected menu item(s) has been changed and no other buttons have pressed within the
5 second time-out, unit will resume to the previous operation.
Description of Menu Items:
CONTRAST – “CONTRAST 5” will be displayed by default. The user now has 5 seconds to press the
VOLUME +/- from 0 – 10.
LOW BATTERY ALARM –“LOW BATT Off” is the default setting. User now has 5 seconds to use the
VOLUME +/- to adjust from “Off” to “On”. The low battery detection will monitor the voltage on the
ACC line. The threshold voltage shall be 10.5 +/- 0.3 VDC. A true low voltage state shall be
determined by the sampling of the ACC line over time, where it is reading consistently at the 10.5 +/-
0.3 VDC.
If selected LOW BATT “On”- The alarm shall be a beep tone heard over the speaker outputs at a
burst of 8 seconds every 30 seconds. The visual warning "LOW BATT" message will be flashing
for 8 seconds every 30 seconds on the LCD.
Page 8 of 32