Mustek dvd-r580 ユーザーズマニュアル

tin

Before Operation

This section covers signifi cant information about the unit’s general behavior. Please read

the below information carefully.

As turning on the HDD+DVD Recorder, the unit directly enters to DVD mode.

If a disc is already placed on the disc tray, the reocrder will start to load the disc right

after power is turned on. It will be invalid by pressing

HDD/DVD to switch to HDD

mode or

Source to change connected source during loading.

If Auto Play is set on, the recorder will start to play the disc or display its menu after

To switch to HDD mode, please do the following:

If there is no disc placed in the recorder, press

HDD/DVD on the remote control

to switch to HDD mode.

If there is a disc placed in the recorder, press

Stop twice to completely stop DVD

playback. Press

HDD/DVD on the remote control to switch to HDD mode.

When pressing

Stop for a fi rst time during DVD playback, the recorder turns to

a pre-stop status and memorizes the position where the playback is stopped. To start

play from where the playback has been stopped, press

Play.

If intending to completely stop DVD playback in order to operate the other functions

in pass-through mode, press

Stop for a second time following the previous stop

operation.

When recording programs to a DVD+RW or DVD+R disc, after the disc is loaded and its

disc menu is displayed on the screen, press

Record once to switch the recorder

to record mode. Then press

Source to select a preferred source for recording. To

start the recording, press

Record again.

To display the title menu during HDD playback, press

Menu or

Title. To

leave the menu, press

Play.

To return to the title menu during DVD playback, press

Menu or

Title.

appears on the right top corner of the screen, it indicates that the action is

prohibited or not available.