Intel Desktop Board D945GPM KD945GPMKRPAK10 ユーザーズマニュアル
製品コード
KD945GPMKRPAK10
Intel Desktop Board D945GPM Technical Product Specification
54
2.7 Connectors
CAUTION
Only the following connectors have overcurrent protection: back panel USB, front panel USB, and
PS/2.
PS/2.
The other internal connectors are not overcurrent protected and should connect only to devices
inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors
to power devices external to the computer’s chassis. A fault in the load presented by the external
devices could cause damage to the computer, the power cable, and the external devices themselves.
inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors
to power devices external to the computer’s chassis. A fault in the load presented by the external
devices could cause damage to the computer, the power cable, and the external devices themselves.
This section describes the board’s connectors. The connectors can be divided into these groups:
• Back panel I/O connectors
• Component-side I/O connectors (see page 54)
• Back panel I/O connectors
• Component-side I/O connectors (see page 54)
2.7.1 Back Panel Connectors
Figure 16 shows the location of the back panel connectors. The back panel connectors are
color-coded. The figure legend (Table 16) lists the colors used (when applicable).
color-coded. The figure legend (Table 16) lists the colors used (when applicable).
OM17558
A
C
H
D
F
G
I
B
E
N
M
O
L
K
J
Figure 16. Back Panel Connectors