Ricoh 2035e ユーザーズマニュアル
Changing the Paper Size
127
5
F
Square the paper and load it into
the tray.
the tray.
Important
r Check that the top of the stack is
not higher than the limit mark
inside the tray.
inside the tray.
r Make sure the paper stack is
flush against the right side
fence.
fence.
Note
r Fan the paper before loading.
r Straighten curled or warped pa-
r Straighten curled or warped pa-
per before loading.
G
After loading, make sure that on
either side, the paper does not
catch (on 1). Push down the paper
stack.
either side, the paper does not
catch (on 1). Push down the paper
stack.
H
Lock the side lever.
I
Adjust the tray size with the pa-
per size selector to the new paper
size.
per size selector to the new paper
size.
To adjust the paper size to a size
not indicated on the paper size
selector
not indicated on the paper size
selector
A Set the paper size selector to
the p mark.
B Press the {User Tools/Counter}
key.
C Press
[
System Settings
]
.
D Press
[
Tray Paper Settings
]
.
E Press
[
Tray Paper Size: Tray 1
]
,
[Tray Paper Size: Tray 2
]
,
[
Tray Pa-
per Size: Tray 3
]
or
[
Tray Paper
Size: Tray 4
]
.
F Select the required size, and
then press
[
OK
]
.