Ricoh 3224C 参照ガイド

Delivering Scan Files

54

To use the machine as a network delivery scanner, the preparation described be-
low is required.

Connect the machine to the network with an Ethernet cable or 
IEEE 1394 cable, or use wireless LAN.

To connect using an IEEE 1394 cable, the IEEE 1394 interface 
board is required. To connect using wireless LAN, the IEEE 
802.11b interface unit is required.

See Network Guide.

To deliver scan files, the following [System Settings] settings 
must be specified correctly. (Certain other settings must also be 
specified.)

• IP address

• subnet mask

Also, [On] must be selected for [Delivery Option] under [File Trans-
fer]

. For details about making settings and other settings, see 

.

Make settings for the network delivery scanner function, such as 
Destination List Settings.
See p.93 “Initial Scanner Setup”.

Install the ScanRouter delivery software required for using the 
network delivery scanner functions on the delivery server.
See p.11 “DeskTopBinder”.

After installing the software, make the required settings for 
server maintenance and delivery service.

For details, see the ScanRouter delivery software manuals.

Set the destination, sender information, and connected devices 
in the ScanRouter delivery software.

On the client computers, install the software required for view-
ing or retrieving files by connecting to the delivery server, such 
as DeskTopBinder.