Ricoh fax3310l ユーザーガイド

21

There are several options for setting up printing in a Windows NT environment.
• If a NetWare server is present, NetWare print services might be used by fol-

lowing the NetWare Configuration instructions in this guide.

• Peer-to-peer print services can be available by using “IP Peer-to-Peer”.
• LPR print services can be used via TCP/IP by following the instructions in

this section.

Windows NT printing is very flexible. It is possible to configure the individual
Windows NT or Windows 95/98/Me workstations to print using a different
protocol from the Windows NT server. For example, a Windows NT server
could be configured to print to the Network Interface Board via TCP/IP using
the instructions in this section. The Network Interface Board could then be des-
ignated as shared on the NT server, allowing workstations to print via the NT
server using a different protocol.
The optimum Windows NT printing configuration depends on the particular
environment and user as well as administrator experience and preferences. Gen-
erally, LPR printing over TCP/IP covered in the following instructions is the
best choice for environments where TCP/IP is already in use.