Ricoh fax3310l ユーザーガイド

33

This chapter describes how to configure the printer to use as a print server in a
NetWare environment.

❖

❖

❖

❖ SmartNetMonitor for Admin

To use a printer in a NetWare environment, configure the NetWare printing
environment by using SmartNetMonitor for Admin.

❒ If you configure NetWare printing environment by using SmartNetMoni-

tor for Admin under following environment, NetWare Client which is pro-
vided by Novell is required.
• NDS mode in Windows 95/98/Me
• NDS or Bindary mode in Windows 2000/Windows NT4.0

❖

❖

❖

❖ Printers listed by SmartNetMonitor for Admin

SmartNetMonitor for Admin displays a list of printers, which are connected
to the network.
If you cannot find out the printer from the displayed list, refer to the config-
uration page printed from the printer. For more information about printing a
configuration page, see “Printing a configuration page” in "Printer Reference
1".

This section describes how to configure your printer to use as a print server in
the NetWare 3.x environment.

❒ This section assumes NetWare is functional and that the necessary environ-

ment for the NetWare Print Service is available.

Basic Procedure

Installing the NIB Setup Tool

Configuring Network Interface Board

Configuring NetWare

Turning the power off and on