Ricoh fax3310l ユーザーガイド
3.2 MAP Requirements
3-2
Monitoring the Network Interface Board
sysadm
.
3.2 MAP Requirements
To use MAP, your workstation must have the following installed:
•
Microsoft TCP/IP protocol
It is not necessary for the network to support TCP/IP. However, the TCP/IP
protocol must be installed even if the network does not support it.
protocol must be installed even if the network does not support it.
•
A Web browser — such as Internet Explorer or Netscape Navigator
•
IPX — if you want to use the IPX search functions
Both the Microsoft standard stacks and Novell 32-bit stacks are supported.
3.3 Installing MAP
You can install MAP on any workstation hard drive or network drive.
To install MAP:
1.
Put the supplied CD-ROM into the CD drive of your workstation.
2.
Choose Start
>
Run.
3.
Type the following command and click OK:
drive
:\MAP\SETUP.EXE
where drive is your CD drive.
4.
Read the information in the MAP installation notes.
5.
At the prompt “Do you wish to install MAP?,” click Yes.
6.
Select a destination directory for the program (default is
C:\Program Files\MAP
) and click Next.
7.
Select a program folder (default is MAP) and click Next.
Note:
You cannot use MAP with Windows 3.1.