Ricoh fax3310l ユーザーガイド
NetWare Configuration
4-1
Chapter 4
NetWare Configuration
This chapter describes configuring the Network Interface Board as follows:
•
Using PCONSOLE with NetWare 3.x
•
Using PCONSOLE with NetWare 4.x Bindery Services (there is no bindery
function in Version 5.x )
function in Version 5.x )
•
Using NWADMIN with NetWare 4.x and 5.x Directory Services
•
Using MAP or a Web browser to access parameters for NetWare
•
Using standard NW Setup utilities to change the configuration
Note:
These instructions assume that your NetWare environment is set up correctly accord-
ing to the Novell documentation.
ing to the Novell documentation.
4.1 Configuring NetWare 3.x
Before configuring NetWare, use MAP or a Web browser to determine if the Network
Interface Board has the name you want — either the default name or a user-defined name.
See Chapter 3, Monitoring the Network Interface Board.
Interface Board has the name you want — either the default name or a user-defined name.
See Chapter 3, Monitoring the Network Interface Board.
Note:
Novell recommends upgrading to 4.2 and no longer supports versions lower than 3.2.
The general procedure for configuring the Network Interface Board for NetWare is as
follows. Refer to the relevant sections in this chapter for detailed information.
follows. Refer to the relevant sections in this chapter for detailed information.
•
Using PCONSOLE, select the file server you want to use
•
Create the print queues
•
Specify the Network Interface Board as a print server
•
Configure the print server and printer
•
Assign the print queues
•
Set Notify options