Ricoh fax3310l ユーザーガイド
4.4 Configuring the Network Interface Board
4-12
NetWare Configuration
5.
Click OK.
4.3.6 Checking Assignments
1.
In NWADMIN, choose Object
->
Browse.
2.
In the NWADMIN directory tree, double-click the print queue object.
The Print Queue window opens.
3.
Click Assignments.
If you configured the print queue and printer correctly, they will appear in the
proper boxes in the Print Queue window.
proper boxes in the Print Queue window.
4.
Click Cancel.
4.3.7 Setting Up and Resetting the Printer
After completing the NWADMIN configuration, you must set up and reset (power cycle)
the printer before you can begin printing.
the printer before you can begin printing.
4.4 Configuring the Network Interface Board
Use the MAP utility or a Web browser to:
•
Define the context and tree of the Print Server
•
Change the Print Server name
•
Set a password
•
Set values for Bindery Mode
For more information, see Chapter 3, Monitoring the Network Interface Board.
To configure the Network Interface Board:
1.
Access the setup pages for the Network Interface Board using MAP or a Web
browser.
browser.
2.
Once you have accessed the Network Administration pages or the Main Menu,
choose Setup NetWare under Protocols.
choose Setup NetWare under Protocols.
3.
Confirm that there is a check mark in the Enable NetWare option. If necessary,
put a checkmark in that option.
put a checkmark in that option.
4.
Optionally, enter a name in the Print Server Name field.
To use the default name, leave the field blank.