Ricoh fax3310l ユーザーガイド
5.2 Windows IP Peer-to-Peer Printing
Windows Peer-to-Peer Printing
5-5
2.
Double-click Add Printer.
The Add Printer wizard appears. Click Next to proceed.
3.
Choose the Local Printer option and click Next.
4.
Select the make and model of the printer you want to use and click Next.
A list of printer ports appears. Any IPX peer-to-peer printers that have been
selected from IPX-P2P Setup appear in this list.
selected from IPX-P2P Setup appear in this list.
5.
Select the IPX printer you want to use.
6.
Complete the remainder of the printer setup procedure as you would normally.
To change the printer port:
1.
Right-click the printer icon.
2.
Choose Properties and then choose the Details tab (it can take up to 15 seconds
to access).
to access).
3.
Select the printer address you want to use from the Print to the Following Port
list. (In Windows NT and Windows 2000, you must first deselect the previous
printer port.)
list. (In Windows NT and Windows 2000, you must first deselect the previous
printer port.)
4.
Click OK.
5.2 Windows IP Peer-to-Peer Printing
Windows IP Peer-to-Peer printing allows Windows 95/98/Me workstations or Windows
NT 4.0 workstations and servers to print to Network Interface Board printers without an
intervening server and without using IPX. The main features of Windows IP Peer-to-Peer
printing are:
NT 4.0 workstations and servers to print to Network Interface Board printers without an
intervening server and without using IPX. The main features of Windows IP Peer-to-Peer
printing are:
•
Runs on Windows 95/98/Me workstations and on Windows NT 4.0 workstations
or servers “out of the box”
or servers “out of the box”
•
Implements IP peer-to-peer bi-directional printing between Windows
workstations and Network Interface Board printers
workstations and Network Interface Board printers