Ricoh fax3310l ユーザーガイド

5.2 Windows IP Peer-to-Peer Printing

5-11

You can add printers manually whenever the program cannot find printers automatically 
because of the router setup or hop count setting. In general, this should not be necessary.

Choose Start 

 IP-P2P 

 IP-P2P.

The IP Peer-to-Peer Setup screen appears.

Click Printers.

Enter information for the printer in all the following fields:

— IP Address

Enter the IP address of the printer you want to add.

Add

Lets you manually add a printer to the Available Printers list by 
entering information in the fields to the left of the button. This 
bypasses the Find Printers function. The port is not checked to 
see if it is actually available on the network.

Delete

Deletes the highlighted printers from the Available Printers 
list. Printers deleted this way no longer appear in the Windows 
Port List. However, the printer is not actually deleted from the 
network — it is only removed from the list. You can put the 
printer back on the list by clicking Find Printers so long as 
the printer is still connected to the network.

Find Printers

Searches the network for printers. The default method for 
displaying the list of printers is by IP Address.

Clear

Clears the Available Printers list. This does not clear any 
printer marked with the Permanent flag (P).

Select

Flags the highlighted printers with an S. Only 30 printers can 
be selected at one time. When the Windows Port List is 
displayed during the process of adding or changing a printer, 
only selected printers are listed.

Permanent

Flags the highlighted printers with a P. These printers remain 
in the Available Printers list even if the printers are physically 
removed from the network or you click Clear.