Ricoh ap1400 ユーザーズマニュアル
Chapter 3 -
1
Chapter 3
Using the Management Access Program
or a Standard Web Browser
MAP has the following requirements:
Ÿ
The Microsoft TCP/IP protocol stack, the Microsoft IPX protocol stack, or Novell
NetWare 32-bit IPX protocol stack must be installed on this PC.
NetWare 32-bit IPX protocol stack must be installed on this PC.
Ÿ
A web browser must be installed on this PC. Both Netscape Navigator and Microsoft
Internet Explorer (3.02 or later) are supported.
Internet Explorer (3.02 or later) are supported.
The Management Access Program (MAP) uses a Windows-based HTML viewer program
linked with a proprietary bi-directional IPX/IP channel program to allow access to the Network
Interface Board's HTML-based monitoring and maintenance capabilities. An IP Web Browser
also provides access to this capability directly. Either program allows you to:
linked with a proprietary bi-directional IPX/IP channel program to allow access to the Network
Interface Board's HTML-based monitoring and maintenance capabilities. An IP Web Browser
also provides access to this capability directly. Either program allows you to:
Ÿ
Configure your network protocols for the Network Interface Board.
Ÿ
Reset the Network Interface Board remotely to either clear an error condition, or return
the print server to its factory default settings.
the print server to its factory default settings.
Ÿ
Troubleshoot problems in the Network Interface Board.
Ÿ
Enable or disable the status sheet printout.
Ÿ
Access a context-sensitive help menu that fully explains how to use each Management
Access Program feature.
Access Program feature.
Ÿ
Access the online help that explains how to use the many features of this program.
Note:
Some functions provided with the Management Access Program or the Web
Browser require a password. The factory default password is "sysadm".