Ricoh AP400 ユーザーガイド

ページ / 154
Precautions
139
7
Using DHCP
You can use the printer under a DHCP environment. You can also register the
printer NetBIOS name on a WINS server when it is running.
If you connect an Ethernet interface and IEEE 1394 (IP over 1394) interface simul-
taneously, pay attention to the following:
❖ When a static IP address is set for both interfaces
• IP Address: If interface IP addresses overlap, the Ethernet interface is se-
lected.
• Subnet Mask: If interface subnet masks overlap, the Ethernet interface is
selected.
• Gateway Address: The selected value is applied.
Note
❒ Make the gateway address setting inside the subnet set in the interface.
❒ If a value is beyond the range of the subnet selected by the interface, the
machine operates with "0.0.0.0".
❖ When obtaining addresses from the DHCP server
• IP Address, Subnet Mask: You can configure addresses assigned by a
DHCP server.
Note
❒ If IP addresses overlap or the same subnet IP addresses are selected, the
effective value is assigned only to the prioritized interface.
❒ Default interface priority is Ethernet.
• AutoNet: A temporary IP address starting with 169.254 that is not used on
the network, assigned to the prioritized interface.
Note
❒ Default interface priority is IEEE 1394 (IP over 1394).
• Gateway Address, DNS Server Address, and Domain Name: You can con-
figure the addresses assigned by DHCP to the prioritized interface.
Note
❒ Default interface priority is Ethernet.