Ricoh AP400 ユーザーガイド
NetWare Configuration
64
5
JJJJ
After confirming the settings, click [Next>].
The settings take effect, and NIB Setup Tool closes.
The settings take effect, and NIB Setup Tool closes.
KKKK
Exit SmartNetMonitor for Admin.
LLLL
Turn the printer power off and on.
Note
❒ To check the printer is configured correctly, enter the following after the
command prompt:
F:> USERLIST
❒ If the printer works as configured, the name of the print server appears as
an attached user.
Setting Up as a Remote Printer
AAAA
Log on to the file server as a Supervisor or the equivalent of a Supervisor.
BBBB
Run the SmartNetMonitor for Admin.
CCCC
On the [Group] menu, point to [Search Device], and then click [IPX/SPX].
A list of printers appears.
A list of printers appears.
Note
❒ If you cannot identify which printer to configure from the list of printers,
print the configuration page and find it. For more information about print-
ing the configuration page, see “List/Test Print Menu” in the Printer Refer-
ence provided as a PDF file on the CD-ROM labeled “Operating
Instructions”
ing the configuration page, see “List/Test Print Menu” in the Printer Refer-
ence provided as a PDF file on the CD-ROM labeled “Operating
Instructions”
❒ If no printer name appears on the list, match the IPX/SPX frame types be-
tween the computer and printer. Use the [Network] dialog box of Windows
to change the computer frame type. For more information about changing
equipment frame types, see “Configuring the Printer for the Network” in the
Setup Guide.
to change the computer frame type. For more information about changing
equipment frame types, see “Configuring the Printer for the Network” in the
Setup Guide.
DDDD
Select the printer you want to configure, and then click [NIB Setup Tool] on
the [Tools] menu.
the [Tools] menu.
EEEE
Click [Property Sheet], and then click [OK].
FFFF
Click the [NetWare] tab, and then make the following settings:
A In the [Print Server Name] box, enter the name of the print server.
B In the [File Server Name] box, enter the name of the file server in which a
A In the [Print Server Name] box, enter the name of the print server.
B In the [File Server Name] box, enter the name of the file server in which a
print server is to be created.
By clicking [Browse], you can select a file server among those listed in the
[Browse]
By clicking [Browse], you can select a file server among those listed in the
[Browse]
dialog box.