Ricoh AP400 ユーザーガイド
NetWare 4.x, 5/5.1, 6 - Advanced Settings
71
5
F In the [Print Server Operation Mode] group, click [As Print Server].
G Click [OK] to close the property sheet.
H After the confirmation dialog box appears, click [OK].
G Click [OK] to close the property sheet.
H After the confirmation dialog box appears, click [OK].
EEEE
Exit SmartNetMonitor for Admin.
After this step, proceed to step
After this step, proceed to step
Setting Up as a Remote Printer
AAAA
Log on to the file server as an Admin or the equivalent of an Admin.
BBBB
Run the SmartNetMonitor for Admin.
CCCC
On the [Group] menu, point to [Search Device], and then click [IPX/SPX].
A list of printers appears.
A list of printers appears.
Note
❒ If you cannot identify which printer to configure from the list of printers,
print the configuration page and find it. For more information about print-
ing the configuration page, see “List/Test Print Menu” in the Printer Refer-
ence provided as a PDF file on the CD-ROM labeled “Operating
Instructions” .
ing the configuration page, see “List/Test Print Menu” in the Printer Refer-
ence provided as a PDF file on the CD-ROM labeled “Operating
Instructions” .
❒ If no printer name appears on the list, match the IPX/SPX frame types be-
tween the computer and printer. Use the [Network] dialog box of Windows
to change the computer frame type. For more information about changing
equipment frame types, see “Configuring the Printer for the Network” in the
Setup Guide.
to change the computer frame type. For more information about changing
equipment frame types, see “Configuring the Printer for the Network” in the
Setup Guide.
DDDD
Select the printer you want to configure, and then click [NIB Setup Tool] on
the [Tools] menu.
the [Tools] menu.
EEEE
Click [Property Sheet], and then click [OK].
FFFF
Click the [NetWare] tab, and make the following settings:
A Select [File Server Mode] or [NDS Mode] as the Logon Mode.
B In the [Print Server Name:] box, enter the name of the print server.
A Select [File Server Mode] or [NDS Mode] as the Logon Mode.
B In the [Print Server Name:] box, enter the name of the print server.
Limitation
❒ Enter a maximum of 47 single-byte characters and numerals.
C In the [File Server Name:] box, enter the name of the file server in which a
print server is to be created.
By clicking [Browse], you can select a file server among those listed in the
[Browse File Server]
By clicking [Browse], you can select a file server among those listed in the
[Browse File Server]
dialog box.