Ricoh AP400 インストールガイド
17
2. Installing Options
R CAUTION:
Important
❒ The voltage rating of the connector for options is 24V DC or less.
❒ Turn the power off before removing the Paper Feed Unit Type 400. Removing
❒ Turn the power off before removing the Paper Feed Unit Type 400. Removing
the Paper Feed Unit Type 400 with the power on may cause the printer to fail.
❖
❖
❖
❖ Option List
Note
❒ See the inside front cover of this manual to confirm which printer (Basic
model or Network standard model) you have.
❍ : Available option
*1
With Basic model, these cannot be installed at the same time.
*2
With Network standard model, these cannot be installed at the same time.
Note
❒ A maximum of two Paper Feed Units can be attached to the printer at the
same time.
❒ The installation of the Paper Feed Unit is necessary to attach the Envelope
Feeder Unit.
❒ You must install additional Memory Units to use the 1394 Interface Unit
and Bluetooth Interface Unit.
• Be sure to turn off the printer and wait for about an hour before installing
options. Not waiting for the printer to cool down can result in a burn.
• When lifting the printer, use the inset grips on both sides of the printer, oth-
erwise the printer might fall and cause personal injury.
• When you move the printer, unplug the power cord from the wall outlet to
avoid a fire or an electric shock.
Basic model Printer
Network standard
model Printer
Paper Feed Unit Type 400
❍
❍
Envelope Feeder Type 400
❍
❍
AD450 (Duplex Unit)
❍
❍
Memory Unit Type C (SDRAM Module)
❍
❍
Hard Disk Drive Type 2600
❍
❍
❍
❍
❍
❍
❍
Bluetooth Interface Unit Type 2045
❍
❍