Ricoh AP400 インストールガイド
Paper Feed Unit Type 400
21
2
Paper Feed Unit Type 400
R CAUTION:
Important
❒ Do not slide more than one paper
tray out at the same time. Having
more than one full paper tray fully
extended could cause the machine
to topple.
more than one full paper tray fully
extended could cause the machine
to topple.
❒ More than two Paper Feed Units
Type 400 cannot be attached.
❒ Check the printer nameplate to
confirm the model code.
AAAA
Check the contents of the box for
the following items:
• Paper Feed Unit (including a
the following items:
• Paper Feed Unit (including a
paper tray)
• Installation Guide
BBBB
Confirm that the followings are
true:
• The power switch is turned off.
• The power cord is unplugged
true:
• The power switch is turned off.
• The power cord is unplugged
from the wall outlet.
CCCC
Remove the adhesive tape from
the Paper Feed Unit.
the Paper Feed Unit.
Note
❒ If you attach two Paper Feed
Units at the same time, stack
them up in advance.
them up in advance.
DDDD
There are three pins on the top of
the Paper Feed Unit that point
straight up. On the bottom of the
printer there are three holes.
Align the holes over the pins, and
then lower the printer gently onto
the Paper Feed Unit.
the Paper Feed Unit that point
straight up. On the bottom of the
printer there are three holes.
Align the holes over the pins, and
then lower the printer gently onto
the Paper Feed Unit.
EEEE
Attach the interface cable to the
printer.
printer.
• The printer weighs about 17 kg
(37.5 lbs.).
• When lifting the machine, use
the inset grips on both sides.
Otherwise the printer could
break or cause injury if dropped.
Otherwise the printer could
break or cause injury if dropped.
ZKEX390E
ZKEX400E
ZKEH221E