Ricoh AP400 インストールガイド
802.11b Interface Unit Type A
35
2
802.11b Interface Unit Type A
Note
❒ Depending on the model you use,
the Network Interface Board , the
1394 Interface Unit, 802.11b Inter-
face Unit, and the Bluetooth Inter-
face Unit cannot be installed to the
printer at the same time. For more
information, see p.17 “Installing
Options”.
1394 Interface Unit, 802.11b Inter-
face Unit, and the Bluetooth Inter-
face Unit cannot be installed to the
printer at the same time. For more
information, see p.17 “Installing
Options”.
Important
❒ Before touching the 802.11b Inter-
face Unit, touch something metal
to discharge any static electricity.
Static electricity can damage the
802.11b Interface Unit.
to discharge any static electricity.
Static electricity can damage the
802.11b Interface Unit.
❒ Do not subject the 802.11b interface
unit to physical shocks.
AAAA
Check the contents of the box for
the following items:
• 802.11b Interface Unit
• Card
• Antenna Cap
• Installation Guide
the following items:
• 802.11b Interface Unit
• Card
• Antenna Cap
• Installation Guide
BBBB
Confirm that the followings are
true:
• The power switch is turned off.
• The interface cable is un-
true:
• The power switch is turned off.
• The interface cable is un-
plugged from the printer.
CCCC
Remove the two screws holding
the controller board in place.
the controller board in place.
Note
❒ Use a coin or similar object if the
screws do not turn easily.
❒ These screws are used again in
step
DDDD
Pull out the handle of the control-
ler board.
ler board.
ZKEX750E
ZKEX370E