Haier l26v6-a8 ユーザーズマニュアル
English-20
CH+
CH-
VOL-
VOL+
MENU
System setup
2. Press VOL+ button on the remote controller to
enter the menu of system setup.
3. Press CH+/- to select desired item on the menu.
4. Press VOL+/- to adjust values level.
enter the menu of system setup.
3. Press CH+/- to select desired item on the menu.
4. Press VOL+/- to adjust values level.
OSD language option
Repeat step 3 and 4 to select the language either
Chinese or English.
Chinese or English.
Suspend mode
Repeat step 3 and 4 to set on or off Suspend Mode.
5 minutes after the Suspend Mode is set, the
system will enter an energy efficiency status
(standby mode).
5 minutes after the Suspend Mode is set, the
system will enter an energy efficiency status
(standby mode).
Background ON/OFF
Repeat step 3 and 4 to select Background ON/OFF
when no signal appears on the screen.
when no signal appears on the screen.
OSD Position
Repeat step 3 and 4 to locate OSD freely on the
screen for the most desirable position, including
top left , top center , top right , center left , center,
center right , bottom left , bottom center and bottom
right.
Note: OSD Position can only be selected when
OSD Stretch is not intended.
screen for the most desirable position, including
top left , top center , top right , center left , center,
center right , bottom left , bottom center and bottom
right.
Note: OSD Position can only be selected when
OSD Stretch is not intended.
OSD Transparency
Repeat step 3 and 4 to select semi transparency
and opaque background of OSD.
and opaque background of OSD.
OSD Stretch
Repeat step 3 and 4 for option of OSD Stretch on
or off.
or off.
Color system option
In TV/AV1/AV2/Svideo mode, repeat step 3 and 4
to set the color system of the front interface among
the options of automatic, PAL, PAL60, NTSC3.58,
NTSC4.43 and SECAM. Automatic mode is usually
set as default.
to set the color system of the front interface among
the options of automatic, PAL, PAL60, NTSC3.58,
NTSC4.43 and SECAM. Automatic mode is usually
set as default.