Frigidaire faqe7071l ユーザーガイド

10

To change the preset level, press the Dry Level button 

to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available 

with every cycle. If a Dry Level is not appropriate for the 

cycle, it cannot be selected.
The Dry Level selected for the cycle will be remembered 

and recalled each time that cycle is selected in the future. 

To return to factory settings, press the Start/Pause and 

Select buttons at the same time and hold until the signal 

sounds.

Í

To change the Dry Level after the cycle starts, press 

Start/Pause, adjust the setting and press Start/

Pause to resume the cycle.

Select the Normal dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or over-dried at 

the end of the cycle. To increase drying time for similar 

loads in the future, select High. For loads requiring less 

drying time, select Low.
Select Damp for items you wish to partially dry before 

hanging or ironing.

To select an option, press Options until the indicator 

for the desired option fl ashes, then press Select. If an 

option is not available for a cycle, the indicator will not 

light. Follow the same steps to delete an option.

Select Shrink Guard to lower the initial drying 

temperature to protect fabrics from overdrying.
Wrinkle Release

Select Wrinkle Release if the dried load might not 

be removed promptly at the end of the cycle. The dry 

load will continue tumbling without heat to help reduce 

wrinkling. When Chime is selected, a beep will be 

heard periodically. The load may be removed any time 

during Wrinkle Release.
Damp Alert (on select models)

For loads that contain some items you plan to hang 

dry, fl at dry or iron, add the Damp Alert option to 

any Auto Dry cycle. A signal will sound when the load 

has reached the damp dryness level to remind you to 

remove those items to hang dry, dry fl at or iron dry. 

Open the door, remove those items, close the door and 

press the start button to continue drying the remaining 

items.
Chime

A signal will sound at the end of the cycle (and 

periodically during Wrinkle Release) if this option is 

selected. The signal has an adjustable volume level or 

can be turned off.

Í

To change the Options after the cycle starts, press 

Start/Pause, adjust the setting and press Start/

Pause to resume the cycle.

Recommended for durable fabrics and towels.
High

Recommended for most cotton fabrics.
Normal

Recommended for wrinkle free, easy care, lightweight 

fabrics and bulky loads.
Low

Recommended for delicate fabrics.
Air Dry

This setting (no heat) should only be used with a Timed 

Dry cycle to dry items containing feathers, down, foam 

rubber, plastics or rubber-like materials; to refresh 

clothing, stuffed animal, pillows or blankets; and to dust 

draperies.