Nikon P5100 ユーザーガイド
138
Optional Accessories
Techni
cal N
o
te
s
Attaching Converter Lenses
Attach the Wide-angle Converter WC-E67 and Telephoto Converter
TC-E3ED (available separately from Nikon) as described below (the illustrations
show the WC-E67). See the converter instruction manual for details.
TC-E3ED (available separately from Nikon) as described below (the illustrations
show the WC-E67). See the converter instruction manual for details.
1
Remove the lens ring.
Turn the camera off and remove the lens ring as shown at
right.
right.
2
Remove the rear cap from the converter lens.
3
Attach the Step-down Ring
Adapter UR-E20 and the
converter (available
separately from Nikon).
Adapter UR-E20 and the
converter (available
separately from Nikon).
Attach the Step-down Ring Adapter
UR-E20 to the camera lens 1. Then
screw the converter lens into the Step-down Ring Adapter UR-E20 2.
UR-E20 to the camera lens 1. Then
screw the converter lens into the Step-down Ring Adapter UR-E20 2.
4
Choose a [Converter] option.
Rotate the mode dial to P (Programmed Auto), S (Shutter-Priority Auto), A (Aperture-
Priority Auto), M (Manual), or B (High sensitivity) and select the appropriate converter
type for the [Converter] option in the camera shooting menu (
Priority Auto), M (Manual), or B (High sensitivity) and select the appropriate converter
type for the [Converter] option in the camera shooting menu (
5
Remove the lens cap.
Remove the front cap from the converter lens.
Rotate the mode dial to P, S, A, M, or B when using converter lenses (available
separately from Nikon). To remove the converter, turn the camera off and perform
steps 1 to 4 in reverse order. Set the [Converter] option in the camera shooting
menu (
separately from Nikon). To remove the converter, turn the camera off and perform
steps 1 to 4 in reverse order. Set the [Converter] option in the camera shooting
menu (
A 110) to [None] when no converter is attached.