Scitec 800t ユーザーズマニュアル

ページ / 5
Flash time is also programmable. The procedure is as follows: off-
hook+[STORE] key+1 or 3 or 6+[STORE] key+[FLASH] key, here 1,3,6 
respectively denotes 100ms,300ms,600ms of flash time. 
Pause time is also programmable. The procedure is as follows: off-
hook+[STORE] key+1 or 2 or 3 or 4+[STORE] key+[PAUSE] key, 
here 1,2,3,4 respectively denotes 1s,2s,3s,4s of pause time. 
The HOLD mode may be programmed as PBX hold. The procedure is as 
follows: off-hook+[STORE] key+ PBX hold activating passcode+
[STORE] key+[HOLD] key.
 
The procedure to cancel the code setting in Speed-dial keys, [MSG] key, 
[FLASH] key, [PAUSE] key and [HOLD] key is as follows: off-
hook+[STORE] key+[STORE] key+ Speed-dial keys, [MSG] key, [FLASH] 
key, [PAUSE] key or [HOLD] key. 
 
Programming the Voice Mail Retrieval Touchbar: 
The following key programming sequence will program the 800-3S-5S for 
use with most voice mail systems. Consult your voice mail system 
documentation for programming specifics. 
 
•  Press [STORE] 
•  Dial the voice mail system access number 
•  Press [PAUSE], [PAUSE] 
•  Dial the ID code to retrieve messages for the specific extension 
•  Dial the key that starts the playback of stored messages 
• 
Press the touchbar
 
 
Data port: 
The DATA jack, located on the right side of the telephone, provides a 
convenient extension of the connected telephone line. This jack may be 
used to connect a computer modem, credit card terminal, or other similar 
accessory device directly to the telephone line.  Note that the telephone 
and a connected accessory device are sharing the connected telephone 
line and may not be used simultaneously. 
   
Do not attempt to use the data port for connecting the handset to the 
telephone. The data port is to be used only for connecting computer 
modems or similar accessory devices directly to the telephone line.