Frigidaire gler341cdc0 インストール手順

4

NOTE: Under counter and stack models - 0 inches (0 cm)

for sides, rear, and top.

UNDER COUNTER INSTALLATION

If an under counter* installation is desired, the dryer MUST have a top sheet kit
installed, P/N 131629100. Kit is available from an authorized parts distributor.

*Custom-sized countertop is required.

DO NOT INSTALL YOUR DRYER:
1. In an area exposed to dripping water or outside weather conditions.
2. In an area where it will come in contact with curtains, drapes, or

anything that will obstruct the flow of combustion and ventilation
air.

3. On carpet. Floor MUST be solid with a maximum slope of 1 inch

(2.54 cm).

INSTALLATION IN RECESS OR CLOSET
1. A dryer installed in a bedroom, bathroom, recess or closet, MUST

be exhausted outdoors.

2. No other fuel burning appliance shall be installed in the same

closet as the Gas dryer.

3. Your dryer needs the space around it for proper ventilation.

4. A minimum of 120 square inches (774.2 square cm) of opening,

equally divided at the top and bottom of the door, is required.
Air openings are required to be unobstructed when a door is
installed. A louvered door with equivalent air openings for the
full length of the door is acceptable.

FRONT

SIDES

REAR

TOP

Alcove or
Under  counter

0 (0 cm)

0 (0 cm) 0 (0 cm) 15 (38.1 cm)

Closet

1 (2.54 cm) 0 (0 cm) 0 (0 cm) 15 (38.1 cm)

Closet door ventilation required: 2 louvered openings each 60
square inches (387 square centimeters) — 3 inches (7.6 cm)
from bottom and top of door.

5. The following illustrations show minimum clearance dimensions

for proper operation in a recess or closet installation.