Frigidaire fak124q1 インストール手順

4. Peel off protective backing from track seal. Apply
seal to room side of window track. Center of seal strip
should coincide with the line marked in Step 2. The
two screw holes drilled in Step 3 should be directly
above seal strip in the inner track.

5. Securely attach a siding-protection board to
side of house.

NOTE:

Siding-protection board should be long

enough to span 2 wall studs.

6. Place platform assembly, with platform tab
against inside of window track, and attach it to
window jamb. Use appropriate length screws (Items
9-11 in Preparing For Installation).

7. Adjust platform assembly so that outside edge is
3/16-inch lower than inside edge, as shown right.
This ensures proper water drainage from the air
conditioner.

8. Level platform assembly from side-to-side.
Also, make sure window track is level. Use leveling
shims as necessary to ensure unit is level from side-
to-side.

9. Measure height of window opening from top of
platform assembly as shown right. Subtract 20-5/8
inches. Mark this measurement on plastic window
panel, along the longer side. (continued)

Apply track seal
to window side
of track.

Inside
wall of
house

Siding-protection
board

Outside edge is 3/16-inch
lower than inside.

Put platform
tab against
inside of
track.

Measure
distance and
subtract

20 / inches.