Frigidaire glmb186c インストール手順

Trim Frame

1

Bottom Duct

1

Side Duct

1

1” Screws

6

(4 required, 2 extra)

1

⁄

2

” Screws 

15

(11 required, 4 extra)

Anti-Tip Bracket 

1

Bottom Bracket 

1

Upper Duct 

1

Template

1

Visit our Website at: 

Phillips screwdriver

Pencil

Tape measure

Awl or punch

Drill with 

7

⁄

64

″

bit or #35

164D3370P160
49-40169-1
P/N 316137209 Rev. A

Printed in Korea    (05-01 JR)

Read these instructions completely and carefully.

IMPORTANT –

Save these 

instructions for local inspector’s use.

IMPORTANT –

Observe all 

governing codes and ordinances.

Note to Installer –

Be sure to leave these

instructions with the Consumer.

Note to Consumer –

Keep these 

instructions for future reference.

Unplug the microwave oven before attempting

installation of this kit.

• Skill level

– Installation of this appliance requires basic

mechanical and electrical skills.

• Completion time

– 1-3 hours

Proper installation is the responsibility of the installer. 

Product failure due to improper installation is not

covered under the Warranty.

This kit is UL and CUL listed for installation alone or

over any Frigidaire single electric wall oven.

WARNING –

Before beginning the

installation, switch power off at service panel and lock

the service disconnecting means to prevent power

from being switched on accidentally. When the service

disconnecting means cannot be locked, securely fasten

a prominent warning device, such as a tag, to the

service panel.