Frigidaire FGHG2344M ユーザーガイド

14

A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below. 
quick ice 

Increases the production of ice

water filter

Press and hold for three (3) seconds to reset after filter change.

C/F  

Touch to toggle display from Fahrenheit to Celsius.

default settings Resets all refrigerator settings such as temp, temp display and tones 

to their factory default settings.

Power on-off  Press and hold for three (3) seconds to turn off the cooling system  to 

clean the refrigerator. It also turns off the ice maker. The temperature 

displays will read OFF.

Energy Saver  Keep this switch set on energy saver (light on) for lowest energy 

usage. If moisture appears on the cabinet between the doors, 

pressing this button will turn the light off and enable an electric heater 

used to reduce moisture on the cabinet between the doors. 

Setting cooling temperatures
Press the “∧” or “∨” indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will time out

after 10 seconds and return to the basic display.
Alarms

Door Ajar 

If the door has been left open for an extended period of time, an 

alarm will sound and the door ajar indicator will display on the bot-

tom display of the control panel. The alarm is turned off by closing the 

door. The mute sounds key will blink to prompt the reset of any active 

alarms. Press this key to reset any system alarms.

High Temp  

In the event of a high temperature condition, the temperature display 

will blink and display “HI”.  After 20 minutes, the alarm will sound and 

the high temp indicator will be red on the bottom of the control pan-

el.  The mute sounds icon will illuminate until pressed, acknowledg-

ing the alarm, at which time the highest temperature reached will be 

displayed and the refrigerator will resume normal operation.  In case 

the high temp alarm is not acknowledged at the first alarm sound time

out, when the door is first opened, the alarm sound will be repeated.

Power Fail 

In the event of a power failure, the power fail alert will be displayed 

and the temperature display will blink until the mute sounds icon is 

pressed, acknowledging the alarm. Other modes may be turned off 

until the alarm is acknowledged. The power fail alert is turned off 

and the refrigerator will resume normal operation. The high temp 

Pressing the system on-off icon does not turn off power to your refrigerator.  You 

must unplug the power cord from the wall outlet.