Frigidaire FGHT1844KF ユーザーズマニュアル

6

To ensure proper installation of handles, please review 

these instructions and illustrations thoroughly prior to 

installing the handles.
Additionally, before installing the door handles, make 

sure the door swing is correct. Your model will have

either a right hand or left hand door swing. Follow 

instructions in the Use & Care Guide to reverse the 

doors, if necessary.

  1  Place rounded part of handle onto shoulder screw 

on face of door and align the two (2) holes in top 

of handle with the two (2) holes in top of door.  Do 

  2  Install the two (2) screws into the top of the handle.
  3  Tighten the set screw on the rounded part of the 

handle until the handle is flush with the door, then

tighten another 1/2 turn.

Wear gloves and use extreme CAUTION when installing 

these handles.  The rounded end of the handles may 

be sharp.

  1  Place rounded part of handle onto shoulder screw 

on face of door and align the two (2) holes in 

bottom of handle with the two (2) holes in bottom 

of door.  Do not tighten the set screw yet.

  2  Install the two (2) screws into the bottom of the 

handle.

Handles may be easier to reverse while doors are off.  

Reverse freezer and refrigerator handles as shown.

Be sure doors are set aside in a secure position where 

they cannot fall and cause personal injury.  

  3  Tighten the set screw on the rounded part of the 

handle until the handle is flush with the door, then

tighten another 1/2 turn.