Microtek d3 ユーザーガイド
!
Using the Self-Timer
The Self-timer enables you to automatically take an
image after a delay of 10 seconds.
To shoot with the Self-timer:
1. Set the Mode switch to Photo mode ( ).
2. Press the MENU button.
3. Use the 4-way arrow button to select
To shoot with the Self-timer:
1. Set the Mode switch to Photo mode ( ).
2. Press the MENU button.
3. Use the 4-way arrow button to select
M
- Drive
Mode, then select (Self-timer).
4. Press the MENU button twice to exit the mode
menu.
The Self-timer icon appears on the LCD screen.
5. Frame the subject in the LCD screen, and press the
Shutter button.
The Self-timer countdown begins. You have 10 seconds
to get into position before the picture is taken. A tone
beeps for two seconds before the camera takes the
shot.
NOTE: Self-timer mode is automatically switched off after
the images have been taken.
Before
After
Continuous Shooting
The continuous shooting mode enables you to shoot
three images in rapid succession with a single press of
the Shutter button.
To shoot images continuously:
1. Set the Mode switch to Photo Mode ( ).
2. Press the MENU button.
3. Use the 4-way arrow button to select
To shoot images continuously:
1. Set the Mode switch to Photo Mode ( ).
2. Press the MENU button.
3. Use the 4-way arrow button to select
M
- Drive
Mode, then select (Continuous shooting).
4. Press the MENU button twice to exit the mode
menu.
The Continuous shooting icon appears on the LCD
screen.
5. Frame the subject in the LCD screen, and press the
Shutter button.
Three images are taken in rapid succession after the
Shutter button is pressed.
NOTE:
Continues shooting mode is automatically switched off
after the images have been taken.
If the SD card is filled, the camera will stop taking
pictures.
To prevent blurred images, hold the camera steady before
you press the Shutter button.