Microtek d3 ユーザーガイド
#!
Appendixes
Appendix A Web Cam
(Windows Only)
A Web Cam is a digital camera attached to a computer
that sends images or live video streams to a Web page
and is ideal for video conferencing.
To use the camera as a Web Cam, you need a
To use the camera as a Web Cam, you need a
computer, the appropriate software, and an Internet
connection.
To set up the camera for use as a Web Cam, follow the
To set up the camera for use as a Web Cam, follow the
steps outlined below.
1. Install the Camera Driver.
1. Install the Camera Driver.
a) Turn on your computer, and
insert the supplied Microtek
CD-ROM into the CD-ROM
drive.
NOTE: For Windows 98/98SE users: If the camera
NOTE: For Windows 98/98SE users: If the camera
driver has been installed for viewing images on the
computer, its not required to reinstall camera driver.
b)When the Microtek Software Installer screen comes
up, click Camera Driver, then follow the on-screen
instructions to install.
c) Click EXIT on the Microtek Software Installer screen
when the driver has been installed.
d)Restart your computer.
2. Set the camera to Web Cam
mode.
a. Press the MENU button to
enter the Setup mode ( ).
b.Select
USB Switch, then select Web Cam.
c. Press the MENU twice to exit the mode menu.
3. Connect the camera to your computer, using the
provided USB cable.
Connect one end of the USB
cable to the cameras USB
connector.
Connect the other end of the
USB cable to the USB
connector of your computer.
In a few moments, your
computer will automatically
detect the camera.
A Web Cam screen appears,
A Web Cam screen appears,
indicating that connection is
complete.
4. Position your camera to the
person being teleconferenced
what you want to show.
5. Launch your Web camera
software (e.g. Microsoft Net
Meeting) and start the video
conferencing function. If the
software permits video recording, you can save the
recorded video in a file for later use.
6. When finished, disconnect your camera from the
computer.