Microtek 1000xl ユーザーガイド
ArtixScan 2500 Installation and Operation Manual 23
English
D. Using the 6 x 9 cm Film Holder
1.
Insert the film to be scanned into the 6 x 9 cm Film
Holder.
Holder.
a) Push on the side to open the holder.
b) Place the film in the holder.
c) Pull the side down to close the holder.
Scanning in high resolution: Insert the film to be
scanned into the holder in the area labeled “HIGH
RESOLUTION”. High-resolution scanning is at
2,500 dpi.
scanned into the holder in the area labeled “HIGH
RESOLUTION”. High-resolution scanning is at
2,500 dpi.
2.
Pull the transparency out a little, then place the 6 x 9
cm Film Holder into the transparency tray. Make sure
the holder is seated firmly in the transparency tray by
pushing down on each corner of the holder firmly.
cm Film Holder into the transparency tray. Make sure
the holder is seated firmly in the transparency tray by
pushing down on each corner of the holder firmly.
R
3.
Gently push the transparency tray back in.