Clover cdr-1650 取り扱いマニュアル

 

 

141

There are two ways to access the DVR through the DVR Master as follows. 

▫

  With Set Direct setting 

-  Click the “CONNECT” button on the DVR Master and the “Connect Dialog menu” as shown 

in Fig. 8-8 will be displayed. 

-  Click the “Set Direct” in the Connect Dialog menu and click the “EDIT” button. 

-  Enter the IP address (or WAN IP address of the Router) and Port number, which must be 

the same as DVR has.   

-  Click the “EDIT” button again and the connection list will be created in the Name List (up to 

20 lists).   

-  Choose a Site Name in the Name Lists and then click the “CONNECT” button In order to 

access the DVR.   

▫

  With Get Server setting

 

 

-  Click the “CONNECT” button on the DVR Master and the “Connect Dialog menu” as shown 

in Fig. 8-8 will be displayed.   

-  Click the “Get Server” in the Connect Dialog menu and click the “EDIT” button. 

-  Enter the IP address, Port number and Site Name, which must be the same as the MNS 

has (SETUP-click NETWORK-click MNS in the NETWORK menu: Refer to section 7-7.5 

MNS

 

on page 120).   

-  Click the “EDIT” button again and the connection list will be created in the Name Lists (up 

to 20 lists).   

-  Choose a Site Name in the Name Lists and then click the “CONNECT” button in order to 

access the DVR.