Clover cdr-4010 ユーザーガイド
- 47 -
IP address
Client Program (Supplied).
11.2 Loading
the
host program to PC
Load the program into the PC by using the program CD (supplied) as follows.
How to install the host program
1. Start the operating system (Windows 98, Windows 2000 or Windows XP).
2. Insert the host program CD into the CD-ROM drive.
3. Open
2. Insert the host program CD into the CD-ROM drive.
3. Open
My Computer, and then select CD-ROM drive.
4. Select the Host folder, and then double-click SETUP.EXE. Now the software
installation will begin.
5. After the installation has been completed, the Clover Host icon will be
created on your desktop screen.
6. Double-click
the
Clover Host icon, and the Host GUI appears.
How to set Screen Color and Resolution
1. Click Start, point to Settings, and then click Control Panel.
2. Double-click Display icon.
3. In Display Properties Window, select Settings.
4. Set Colors as True color (32 bit) and Screen area as 1024 by 768 pixels.
2. Double-click Display icon.
3. In Display Properties Window, select Settings.
4. Set Colors as True color (32 bit) and Screen area as 1024 by 768 pixels.
11.3 Cable
connection
Connect the cables between DVR and PC (directly or indirectly Via hub). The link
LED lamps on PC and DVR will be lit when the cable is correctly connected. If not,
please check the connection and try it again. If the problem persists, please
contact us or your local distributor.
please check the connection and try it again. If the problem persists, please
contact us or your local distributor.
12. NETWORKING 1:1 BETWEEN DVR AND PC
12.1 DVR Setting
Connect the monitor and camera(s) to the DVR and plug in the AC power supply.
Turn the unit on.
Note. Screen color of 32 bit and screen pixels of 1024x768 should be
adjusted for the remote monitoring.