Sima wx-268 ユーザーズマニュアル

The WX-268 has two wakeup alarms as well as  a sleep timer and a snooze button to
provide maximum control over your alarm clock.To set the either Alarm 1 or Alarm 2 :

1. Press and hold the Alarm button of your choice.
2. Turn the FUNCTION knob to set the alarm time.
3. Continue to hold the Alarm button.
4. Press the NEXT (>) button to cycle through the five
options; OFF, Buzz (Buzzer), AM, FM and WB (Weather
Band). The selection appears in the top left section of the
LCD screen under the appropriate Alarm heading as
shown at right. If you set the alarm type to OFF, the alarm will not sound.

 - The alarm volume will begin low and then gradually increase

over the first 15 seconds.

 – The unit will alarm for 59 minutes unless stopped by the user by

pressing SNOOZE or OFF.

 - 

Press  the SNOOZE button to silence the wake-up alarm for

9 minutes

The SLEEP button turns the radio on for a set period of time. Repeatedly pressing the SLEEP

button sets the sleep timer in 15 minute increments, starting at a minimum of 15 minutes to
a maximum of 2 hours. The radio will turn off after the sleep timer expires. To de-activate
the sleep timer once it has begun, press either the SNOOZE or OFF buttons.

1.  To select an AM or FM station, press the Radio On button.
2.  Press the BAND button to select the desired radio band. The selected band and station

setting  appears on the LCD screen.  Note: Only the AM or FM band selected as the
EAS alert source will be available.

3.  Use the FUNCTION knob to select the desired frequency. Rotate the knob clockwise to

increase the frequency. Rotate the knob counterclockwise to decrease the frequency.

4.  Press the RADIO OFF button to turn the radio off.

After programming your WX-268, you are ready to use it . Place the radio where it gets
the best reception. To listen to the weather channel press the Radio ON button. To Turn
off the weather channel press the Radio OFF button. To turn the siren or voice off when
an alert is received, press the OFF button.