Lowrance 600c 操作ガイド

106

There are several options you can use with trails. Some affect all trails,

other options can be applied to a particular trail. You can change the

way trails are updated, you can display or hide trails, make them flash

on the screen or not flash, create a new trail, delete a trail, etc.

To access the Trails Menu:
1. Press 

|

|↓ to 

|

|→ to 

|

.

 

 

Delete All Trails
To remove all of the trails from memory: from the Trails Menu, press →

to 

|

|← to 

|

.

Update Active Trail Option
This menu lets you change the way the trail updates occur.
WARNING:

If you uncheck the Update Active Trail option, automatic trail crea-
tion and recording will be turned off, and you must turn it back on

to record trails. The default setting is on.

Press  ↓ or ↑ to 

. With the option highlighted, press

ENT 

to check it (turn on) and uncheck it (turn off).

Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default

automatic mode, the unit doesn't update the plot trail while you're

traveling in a straight line. Once you deviate from a straight line, the

unit "drops" a plot point (trail waypoint) onto the trail. This conserves

plot trail points. If a plot trail uses all of the available points allotted to

it, the beginning points are taken away and placed at the end of the trail.