Nortel 1110 ユーザーガイド
108
Nortel IP Phone 2004
CAUTION
Damage to Equipment
Do not plug any device into your IP Phone 2004 Ethernet
port other than one PC. The IP Phone 2004 does not
support multiple devices connected through the PC
Ethernet port.
port other than one PC. The IP Phone 2004 does not
support multiple devices connected through the PC
Ethernet port.
Figure 9
IP Phone 2004 Ethernet network connections
IP Phone 2004 Ethernet network connections
5
Connect the AC power adapter (optional). Leave the AC adapter
unplugged from the power outlet, connect the adapter to the AC
adapter jack in the bottom of the phone. Form a small bend in the
cable and then thread the adapter cord through the channels in
the stand.
unplugged from the power outlet, connect the adapter to the AC
adapter jack in the bottom of the phone. Form a small bend in the
cable and then thread the adapter cord through the channels in
the stand.
6
Secure the IP Phone footstand to the base of the IP Phone. Use
the angle adjustment grip on the top back of the IP Phone to adjust
the position.
the angle adjustment grip on the top back of the IP Phone to adjust
the position.
7
Power the IP Phone 2004 using either the Power over Ethernet or an
AC power transformer (local power). If you are using local power,
plug the AC power transformer into the nearest power outlet. Make
sure you use the correct AC power transformer is used. The voltage
AC power transformer (local power). If you are using local power,
plug the AC power transformer into the nearest power outlet. Make
sure you use the correct AC power transformer is used. The voltage
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
02.01
Standard
Release 5.0
7 December 2007
Copyright © 2003–2007, Nortel Networks
.