Nortel 1110 ユーザーガイド
556
Appendix I TFTP Server
Expansion Module for IP Phones
The Expansion Module for IP Phone 1100 Series (Expansion Module) uses
the same TFTP Server configuration file method as the IP Phone 1120E, IP
Phone 1140E, and the IP Phone 1150E.
the same TFTP Server configuration file method as the IP Phone 1120E, IP
Phone 1140E, and the IP Phone 1150E.
describes the fields in the configuration file on the TFTP Server.
The section [GEM FW] indicates the firmware is for the Expansion Module.
Set the download mode to AUTO or FORCED. It is recommended that you
set DOWNLOAD_MODE to AUTO.
Set the download mode to AUTO or FORCED. It is recommended that you
set DOWNLOAD_MODE to AUTO.
Table 76
Fields in the TFTP configuration file for the Expansion Module
Fields in the TFTP configuration file for the Expansion Module
Field Name
Field Value
Descriptions
[GEM FW]
Section header for the Expansion Module
firmware download information.
firmware download information.
AUTO
Recommended setting. The application looks at
the version and downloads the FW if it is a newer
version than the one on the phone.
the version and downloads the FW if it is a newer
version than the one on the phone.
DOWNLOAD_MODE
FORCED
The version of firmware is ignored. The firmware
is always downloaded.
is always downloaded.
VERSION
The version string compared to the one on the
phone.
phone.
FILENAME
Image file name. This name must match the file
name of the actual IP Phone FW file.
name of the actual IP Phone FW file.
PROTOCOL
TFTP
Download protocol. This must be TFTP.
SERVER_IP
xxx.xxx.xxx.xxx
IP Address of the TFTP server in decimal.
SECURITY_MODE
0
For future use.
After the IP Phone downloads the firmware from the TFTP Server, the
firmware is upgraded for any attached Expansion Modules, one at a time.
The Expansion Module verifies that the firmware was downloaded and
saved successfully before the IP Phone initiates the firmware download to
the next attached Expansion Module. If any errors occur, which prevent
the firmware from downloading or saving properly, the Expansion Module
reverts to the factory installed firmware. This version of firmware is always
available in case the downloaded firmware is unusable.
firmware is upgraded for any attached Expansion Modules, one at a time.
The Expansion Module verifies that the firmware was downloaded and
saved successfully before the IP Phone initiates the firmware download to
the next attached Expansion Module. If any errors occur, which prevent
the firmware from downloading or saving properly, the Expansion Module
reverts to the factory installed firmware. This version of firmware is always
available in case the downloaded firmware is unusable.
Downloading and configuring fonts
The font files are downloaded as needed using the same TFTP Server
configuration file method as IP Phone 2007, IP Phone 1120E, IP Phone
1140E, and IP Phone 1150E.
configuration file method as IP Phone 2007, IP Phone 1120E, IP Phone
1140E, and IP Phone 1150E.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
02.01
Standard
Release 5.0
7 December 2007
Copyright © 2003–2007, Nortel Networks
.