Nortel 1110 ユーザーガイド

ページ / 560
132
Nortel IP Phone 2004
Extensible Authentication Protocol
Extensible Authentication Protocol (EAP) is a general protocol that fulfills
the protocol requirements defined by 802.1x. For further information about
802.1x, see
Redeploying an IP Phone 2004
You can redeploy an existing previously configured IP Phone 2004 on the
same Call Server. For example, the IP Phone 2004 can be assigned to
a new user (new TN) or to an existing user who moved to a new subnet
by changing the TN of the IP Phone 2004. For further information, see
Converging the Data Network with VoIP Fundamentals (NN43001-260).
Procedure 22
Changing the TN of an existing IP Phone 2004
Step
Action
1
Repower the IP Phone 2004.
During the reboot sequence of a previously configured IP Phone, the
IP Phone 2004 displays the existing node number for approximately
five seconds.
2
If the node password is enabled and NULL, choose one of the
following:
a. Disable the password.
b. Set the password as non-NULL.
3
Press OK when the node number displays.
If
Then
the node password is enabled and
is not NULL
a password screen displays. Go
to
the node password is disabled
a TN screen displays. Go to
.
4
Enter the password at the password screen, and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see Element Manager
System Reference—Administration (NN43001-632)
.
5
Select the Clear soft key to clear the existing TN.
6
Enter the new TN.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003–2007, Nortel Networks
.