Lowrance 3200 操作ガイド

14

See the diagrams on the following page for general wiring connections.
Read your other product’s owner’s manual for more wiring information.

NMEA/DGPS Wiring
To exchange NMEA or DGPS data, the GlobalMap 3200 has one NMEA
0183 version 2.0 communication port. Com port one (Com-1) can be
used to receive NMEA format GPS data or DGPS data. The com port
can also transmit NMEA format GPS data to another device.

The three wires for the com port are combined with the two power
wires to form the power/data cable. Com-1 uses the yellow wire to
transmit, the orange wire to receive and the shield wire for signal
ground.

Com-1 wiring to receive DGPS position information

from a DGPS receiver.

Com-1 wiring to receive NMEA position information

from some other GPS receiver.

Com-1 wiring to transmit NMEA position information

to another NMEA-compatible device.

Mounting the Unit: Bracket, In-Dash or Portable

You can install the GlobalMap 3200 on the top of a dash with the sup-
plied gimbal bracket. It can also be installed in the dash or mounted on
a portable power supply.

If you use the supplied bracket, you may be interested in the optional
R-A-M



 bracket mounting system. This converts the unit's gimbal