Lowrance 5200c 操作ガイド

 

133 

5. Select 

 and press 

. The following message will 

appear: Are you sure you wish to change this device's configuration?  
6. Highlight 

 and press 

. Press 

 repeatedly to get back to the 

main display. 
NOTE: 

The Fluid Level Device Configuration menu also contains the Cali-

brate button, but we will address that later in the segment covering 

Calibration. 

1. Press 

, use 

↑ ↓ to select 

 and press 

. The 

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.  
2. Highlight 

 and press 

, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.  
3. Use 

↑ ↓  to select the engine interface you want to rename and press 

. The Device Configuration menu will appear with the Device Name 

dialog box highlighted. 
4. Press 

 and use 

↑ ↓, ← → to input a name for the interface. Press 

. Press 

 repeatedly to return to the main display. 

1. Press 

, use 

↑ ↓  to select 

 and press 

. The 

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.  
2. Highlight 

 and press 

,

which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page.  
3. Select the desired engine interface and press 

. The Device Con-

figuration menu will appear.  
4. Highlight 

 and press 

, which will open the Location menu 

with the following options: Port, Center, Starboard and Unknown.  
5. Select the desired location and press 

. The following confirmation 

message will appear: Are you sure you wish to change this device's con-
figuration?  
6. Press 

. Press 

 repeatedly to get back to the main display. 

1. Press 

, use 

↑ ↓  to select 

 and press 

. The 

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-