Lowrance 5150c 操作ガイド

74 

3. To change distance settings, scroll 

↓

 or 

↑

 to select the desired cate-

gory, then press 

→ |

 to activate the distance dialog box. Press 

↑ or 

↓ to change the first character, then press → to the next character and 

repeat until the name is correct. 
4. When your adjustments are finished, return to the last page dis-

played by repeatedly pressing 

. 

Anchor Alarm - The anchor alarm may be triggered even when 

you're sitting still. This typically happens when using small (less 

than .05 mile) anchor alarm ranges. 
Arrival Alarm - If you set the arrival alarm's distance to a small 

number and you run a route (see the Navigate Routes segment), 

this unit may not show navigation data to the next waypoint, once 

you arrive at the first one, since you may not be able to come close 

enough to the first waypoint to trip the arrival alarm. 

To check MMC Files:  
Press 

|

|

↓ to 

|

. Press 

↓ to 

|

 to see the free space on the card. 

   

 

The unit has one NMEA 0183 version 2.0 compatible communication 

port, or com port for short. The Com Port Menu, which is accessed from 

the System Setup Menu, lets you configure the communications port to 

send or receive data to another electronic device, such as an autopilot. 

The com port can be used for NMEA Binary data transfer.