Lowrance 540c baja 操作ガイド

21 

 

Drill a 1-inch (25.4 mm) hole in the dash for the power cable. The best 

location for this hole is immediately under the gimbal bracket location. 

This way, the bracket can be installed so that it covers the hole, holds 

the cables in position and results in a neat installation. Some custom-

ers, however, prefer to mount the bracket to the side of the cable hole 

— it's a matter of personal preference. 

 

 

After drilling the hole, pass the power cable's bare-wire end down 

though the hole from the top. 
If you wish, you can fill in the hole around the cables with a good marine 

sealant compound. (Some marine dealer’s stock cable hole covers to con-

ceal the opening.) No matter what type of installation you prefer, be sure