Lowrance 540c baja 操作ガイド

ページ / 172
58 
NOTE 
If you are already located at or near the end of your trail, the arri-
val alarm will go off as soon as you hit 
ENT
. Press 
EXIT
 to clear the 
alarm and proceed. 
5. Now, begin navigating with your unit. 
6. When you reach your destination, be sure to cancel your navigation: 
press 
MENU
|
MENU
|
↓ to 
C
ANCEL 
N
AVIGATION
|
ENT
. The unit asks if you're 
sure; press 
←|
ENT
Transfer Custom Maps and GPS Data Files 
Custom Maps: 
Custom maps work only from the MMC card or SD card. When a card 
containing a Custom Map File is loaded into the unit, the unit auto-
matically loads the map into memory when the unit is turned on. 
Instructions for copying Custom Map Files to an MMC are contained in 
the instruction manual for your MMC card reader and MapCreate 6 
software. For instructions on inserting an MMC into the unit, see Sec. 
2, Installation/Accessories

NOTE: 
To load a NauticPath or Navionics
®
 chart, see Sec. 5 for the entry 
NauticPath or  Navionics Charts.  
GPS Data files: 
GPS Data Files contain waypoints, routes, trails and event marker 
icons. Instructions for copying GPS Data Files between your computer 
and an MMC are contained in the instruction manual for your MMC 
card reader and MapCreate 6 software. 
GPS data automatically recorded in the unit's internal memory must 
be saved to the MMC (as a GPS Data File) in order to store it on your 
personal computer. GPS Data Files stored on an MMC must be copied 
from the card to the unit's internal memory before the unit can read 
them. Here's how: 
1. Insert the MMC into your unit. Press 
MENU
|
MENU
|
↓ to 
S
YSTEM 
S
ETUP
|
ENT
|
↓ to 
T
RANSFER 
M
D
ATA
|
ENT
 and the screen below appears. 
2. The Transfer My Data menu includes a message which tells you if an 
MMC is present or not. If no MMC is present, you must first insert a 
card into the unit in order to activate the Load or Save commands. 
To transfer data from the unit to the MMC: press 
ENT
 (for 
S
AVE
.) 
To transfer data from the MMC to the unit: press 
→ to 
L
OAD
|
ENT