Lowrance 6500c 操作ガイド

106

Update Trail Option
This menu lets you change the way trail updates occur.

WARNING:

If you 

uncheck the Update Trail option, automatic trail

creation and recording will be turned 

off. You must turn

it back on to record trails. The default setting is on.

From the Trails Menu, press 

→

 to 

|

. With 

highlighted, press 

 to check it (turn on) and uncheck it (turn off).

The options are automatic, time, or distance. When it's in the default
automatic mode, the unit doesn't update the plot trail while you're
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
trail points. If a plot trail uses all of the available points allotted to it,
the points at the start of the trail are removed and replaced by points at
the end of the trail.

From the Trails Menu, press 

→

 to 

|

|

↓

 to 

.

Press 

↑

 or 

↓

 to select criteria type|

.

You can update a trail by time, with a range from 1 second to 9999 sec-
onds. The default is 3 seconds. You can update by distance, with a
range from 0.01 mile/nm/km to 9.99 mile/nm/km. The default is 0.10
miles. With one of the Update Criteria selected, use the cursor arrows
to highlight either the 

 or 

 data entry boxes

and press 

. Press 

↑ or ↓  to change the first character, then press →

to the next character and repeat until the entry is correct. Press 

 to

return to the Trail Options Menu.

 

Trail Options menu: Update Time Rate setting (left) and Update Dis-

tance setting (right).